home · games · tech info · articles · about · contact us
 
Disclaimer: This information is provided as is. There may be errors in this information. You may use this information only if you agree that Minimalist / Coinop.org, its employees, and noted authors will never be held responsible for any damage, injury, death, mayhem, etc. caused by errors in the information. When working with high voltage, never work alone and always follow safety precautions.

Document Title: [Ladybug Tech.html (html file)]

Ladybug Bootleg Pinouts

Ladybug Bootleg Pinouts

Submitted by Unknown

Anyone have the real deal? please submit. 

   I have a bootleg (I assume it's a bootleg) LadyBug board, single board
marked MR-702, 22 pin connnector. Here's the pinouts for it. I didn't get
2P Start, though it's probably 16 solder, and though I used solder 7 for
SPK- the real pin maybe solder6 (it's just ground).


Parts           Solder
------------------------
GND       1       GND
GND       2       GND
+5        3       +5
+5        4       +5
+12       5       +12
SPK+      6       
          7       SPK-
          8
          9
          10
          11
1p UP     12
1p RIGHT  13
1p DOWN   14
1p LEFT   15
1p START  16
          17      RED
          18      GREEN
          19      BLUE
          20      SYNC
          21
          22

Disclaimer: Articles in the knowledge base are provided as is. There may be errors in these documents. You may use this information only if you agree that Minimalist, Inc. and Coinop.org will not be held responsible for any damage, injury, mayhem, etc. caused by errors in the information. When working with high voltage, never work alone and always follow safety precautions.
<% End Sub %>